Verifying or manually performing pool 1 drives assignment
Depending on the storage configuration, you must either verify pool 1 drive assignment or manually assign drives to pool 1 for each node in the MetroCluster IP configuration. The procedure you use depends on the version of ONTAP you are using.
About this task
| Configuration type | Procedure |
|---|---|
| The configuration includes either three shelves, or, if it contains more than four shelves, has an uneven multiple of four shelves (for example, seven shelves), and is running ONTAP 9.5. | Manually assigning drives for pool 1 (ONTAP 9.4 or later) |
| The configuration does not include four storage shelves per site and is running ONTAP 9.4 | Manually assigning drives for pool 1 (ONTAP 9.4 or later) |
Give documentation feedback