Skip to main content

Replacing a shelf nondisruptively in a fabric-attached MetroCluster configuration

You might need to know how to replace a shelf nondisruptively in a fabric-attached MetroCluster configuration.

About this task

Note
This procedure is only for use in a fabric-attached MetroCluster configuration.
  1. Disabling access to the shelf
    You must disable access to the shelf before you replace the shelf modules.
  2. Replacing the shelf
    You must physically remove all of the cables and the shelf before inserting and cabling the new shelf and shelf modules.
  3. Reenabling access and verifying the operation
    After the shelf has been replaced, you need to reenable access and verify that the new shelf is operating correctly.