Skip to main content

Docs

ThinkSystem
ThinkEdge
System x
Option

Storage Software

ThinkAgile
Water Cooling Solution

English
简体中文

Docs

Filter by title

MetroCluster Service and Expansion Guide
Deciding whether to use this guide
Where to find procedures for MetroCluster maintenance tasks
MetroCluster failure and recovery scenarios
Performing FC-to-SAS bridge maintenance
Performing FC switch maintenance and replacement
Performing IP switch maintenance and replacement
Adding, removing, or changing ISL ports nondisruptively
Identifying storage in a MetroCluster IP configuration
Hot-adding storage to a MetroCluster FC configuration
Hot-removing storage from a MetroCluster FC configuration
Replacing a shelf nondisruptively in a fabric-attached MetroCluster configuration
When to migrate root volumes to a new destination
Moving a metadata volume in MetroCluster configurations
Renaming a cluster in MetroCluster configurations
Powering off and powering on a data center
Powering off an entire MetroCluster IP configuration
Powering off an entire MetroCluster FC configuration
Reconfiguring the FC switch layout
Port assignments for FC switches
Where to find additional information
Contacting Support
Notices

Performing FC-to-SAS bridge maintenance
Updating firmware on a FibreBridge bridge

Updating firmware on a FibreBridge bridge

The procedure for updating the bridge firmware depends on your bridge model and ONTAP version.

Updating firmware on FibreBridge 7600N bridge on configurations running ONTAP 9.4 and later
You might need to update the firmware on your FibreBridge bridges to ensure that you have the latest features or to resolve possible issues. This procedure should be used for FibreBridge 7600N bridges on configurations running ONTAP 9.4 and later.

Give documentation feedback

Enabling IP port access on the FibreBridge 7600N bridge if necessary

Updating firmware on FibreBridge 7600N bridge on configurations running ONTAP 9.4 and later

© 2024 Lenovo. All rights reserved. Privacy Policy | Terms of Use