Skip to main content

Power Restore Policy

When Power Restore Policy is enabled as Restore, SMM2 remembers the latest compute node power status and restores the power status to where it was before AC is abruptly lost.

Figure 1. Power Restore Policy — DA240 Enclosure
Power Restore Policy — DA240 Enclosure
Figure 2. Power Restore Policy — DW612 and DW612S Enclosure
Power Restore Policy — DW612 and DW612S Enclosure
Power Restore Policy: Determines the mode of operation after loss of power.

  • Always off: Node remains off upon power restore.

  • Restore: Node is restored to the previous state before power failure.

  1. Check the boxes of the nodes that need to enable power restore policy.

  2. Click Apply to activate the setting.

    Note
    SMM2 backs up the configuration settings every 60 seconds. Complete any change to configuration settings within this 60-second period; if not, it will not be saved or go into effect.