Skip to main content

IPMI Command

The section includes information about IPMI commands.

Note

The IPMI via RMCP+ or RMCP is available through OOB communication via the physical interface, the Ethernet port.

Table 1. IPMI command list
NetFn	CMD	Name	NetFn	CMD	Name
0x32	0x90	GET PCS COLLECTED DATA	0x32	0xA9	SET NODE RESTORE POLICY
0x32	0x91	GET PCS STATUS	0x32	0xAA	GET NODE RESTORE POLICY
0x32	0x93	GET CHASSIS MONITORING STATUS	0x32	0xAB	SET PCS ZERO OUTPUT MODE
0x32	0x96	GET SYS LED	0x32	0xAC	GET PCS ZERO OUTPUT MODE
0x32	0x97	SET SYS LED	0x32	0xAD	SMM3 RESET TO DEFAULT
0x32	0x98	GET NODE POWER READING	0x32	0xAF	SET VPD
0x32	0x99	GET NODE SIZE	0x32	0xB0	GET VPD
0x32	0x9D	GET CAP BOUNDARY	0x32	0xB1	FFDC DUMP
0x32	0x9E	SET CAPPING VALUE	0x32	0xB2	SET SMTP CONFIG PARAMETERS
0x32	0x9F	SET CAPPING STATE	0x32	0xB3	GET SMTP CONFIG PARAMETERS
0x32	0xA0	GET CAPPING STATE	0x32	0xC3	GET PCS DATA
0x32	0xA1	SET DATE TIME	0x32	0xF0	GET WEB STATE
0x32	0xA2	GET PCS POLICY OVS	0x32	0xF1	SET WEB STATE
0x32	0xA4	SET NODE RESET / RESEAT	0x32	0xF5	ENCLOSURE VIRTUAL RESEAT
0x32	0xA5	SET NODE RESET / RESEAT	0x32	0xF6	SET SYSTEM ENCLOSURE LRU
0x32	0xA6	BACKUP / RESTORE	0x32	0xFA	GET SECURITY OPTION
0x32	0xA7	GET NODE STATUS	0x32	0xFB	SET SECURITY OPTION
0x32	0xA8	GET SMM3 STATUS

Give documentation feedback