Skip to main content

Power problems

Use this information to resolve issues related to power.

Note
The system Power Conversion Stations (PCS) are installed in the N1380 enclosure.

System error LED is on and event log "Power supply has lost input" is displayed​

To resolve the problem, ensure that:

  1. The Power Conversion Station is properly connected to a power cord.

  2. The power cord is connected to a properly grounded electrical outlet for the server.

  3. Make sure that the Power Conversion Station AC source is stable within the supported range.

  4. Swap the Power Conversion Station to see if the issue follows the Power Conversion Station, if it follows the Power Conversion Station, then replace the failing one.

  5. Review the event log and see how the problem it is to follow the event log actions to resolved the problems.