Skip to main content

System Management Module 3 (SMM3) LEDS

The following illustration shows the LEDs on the SMM3 module.

SMM3 LEDs​

Figure 1. SMM3 LEDs

Table 1. SMM3 connectors and LEDs
1 Identification LED (blue)5 Ethernet port 2 link (RJ-45) LED (green)
2 Power LED (green)6 Ethernet port 2 activity (RJ-45) LED (green)
3 Status LED (green)7 Ethernet port 1 link (RJ-45) LED (green)
4 Check log LED (yellow)8 Ethernet port 1 activity (RJ-45) LED (green)

1 Identification LED: When this LED is lit (blue), it indicates the enclosure location in a rack.

2 Power-on LED: When this LED is lit (green), it indicates that the SMM3 has power.

3 Status LED: This LED (green) indicates the operating status of the SMM3.

  • Continuously on: The SMM3 has encountered one or more problems.

  • Off: When the enclosure power is on, it indicates the SMM3 has encountered one or more problems.

  • Flashing: The SMM3 is working.

    • During the pre-boot process, the LED flashes at 1 Hz then change to keep on.

      • LED flashes at 1 Hz: the SMM3 hardware is working and ready to initialize.

      • LED keeps on: SMM3 is initializing.

      • When the pre-boot process and initialization are completed and the SMM3 is working correctly, the LED flashes at 1 Hz (once every second).

4 Check log LED: When this LED is lit (yellow), it indicates that a system error has occurred. Check the SMM3 event log for additional information.

5 Ethernet port 2 link (RJ-45) LED: When this LED is lit (green), it indicates that there is an active connection through the remote management and console (Ethernet) port 2 to the management network.

6 Ethernet port 2 activity (RJ-45) LED: When this LED is flashing (green), it indicates that there is an activity through the remote management and console (Ethernet) port 2 over the management network.

7 Ethernet port 1 link (RJ-45) LED: When this LED is lit (green), it indicates that there is an active connection through the remote management and console (Ethernet) port 1 to the management network.

8 Ethernet port 1 activity (RJ-45) LED: When this LED is flashing (green), it indicates that there is an activity through the remote management and console (Ethernet) port 1 over the management network.