Saltar al contenido principal

FQXPMCL0003K : BMC communication failed: DRIVER Mount Failure.

BMC communication failed: DRIVER Mount Failure.

This message is reported when OS installation failed because of a driver mount failure.

Severity​

Warning

User Action​

  1. Ensure proper operation of the virtual USB connection.
  2. Restart BMC via supported method and reboot the system.
  3. Reflash BMC firmware.
  4. Clone the image over and retry the operation.
  5. Perform AC reset or virtual reseat.
    Note
    When performing AC reset, after powering off AC, wait for several seconds before powering on AC. After AC power is restored, power on the host system.
  6. If the problem persists, contact technical support.