Saltar al contenido principal

FQXPMUP0208M : Failed to execute the reboot BMC command.

Failed to execute the reboot BMC command.

This message is reported when executing the reboot BMC command failed.

Severity​

Error

User Action​

  1. Restart BMC via supported method and reboot the system.
  2. Reflash BMC firmware.
  3. If the problem persists, perform AC reset or virtual reseat.
    Note
    When performing AC reset, after powering off AC, wait for several seconds before powering on AC. After AC power is restored, power on the host system.
  4. If the problem persists, contact technical support.