Saltar al contenido principal

FQXPMUP0207M : The update package is invalid. Failed to update the firmware.

The update package is invalid. Failed to update the firmware.

This message is reported when firmware update failed because the update package is invalid.

Severity​

Error

User Action​

  1. Ensure that the update package is not corrupt and retry the update.
  2. Ensure proper connection to USB/network drive and retry the update.
  3. Restart BMC via supported method and BMC setting via UEFI setup or "Restart Management Controller" in BMC web UI. Then, reboot the system.
  4. Reflash the BMC firmware.
  5. Perform AC reset or virtual reseat.
    Note
    When performing AC reset, after powering off AC, wait for several seconds before powering on AC. After AC power is restored, power on the host system.
  6. If the problem persists, try a different Lenovo tool to perform the update (e.g., XClarity Administrator, XClarity Controller, or XClarity Essential OneCLI).
  7. If the problem persists, contact technical support.