본문으로 건너뛰기

Messages

When attempting to resolve issues with your server, the best practice is to begin with the event log of the application that is managing the server.

  • If you are managing the server from the Lenovo XClarity Administrator, begin with the Lenovo XClarity Administrator event log.

  • If you are using some other management application, begin with the Lenovo XClarity Controller event log.

The event log contains server hardware events that are recorded by the Lenovo XClarity Controller or by UEFI. In addition, events can be generated when you perform diagnostic testing on hard drives or memory through the Lenovo XClarity Provisioning Manager (although these events are not stored in the event log).

Use this section to view the events that can be generated by Lenovo XClarity Controller, UEFI, or the Lenovo XClarity Provisioning Manager. For each event, a user action is available to help you understand what must be done to resolve the issue.

  • Event and alert message format
    You can use the following content to help you understand the event and alert message format.
  • XClarity Controller events
    When a hardware event is detected by the Lenovo XClarity Controller on the server, the Lenovo XClarity Controller writes that event in the system-event log on the server.
  • UEFI events
    UEFI error messages can be generated when the server starts up (POST) or while the server is running. UEFI error messages are logged in the Lenovo XClarity Controller event log in the server.
  • Lenovo XClarity Provisioning Manager V3 events
    The following events can be generated by the Lenovo XClarity Provisioning Manager.