UEFI events
UEFI error messages can be generated when the server starts up (POST) or while the server is running. UEFI error messages are logged in the Lenovo XClarity Controller event log in the server.
For each event code, the following fields are displayed:
- Event identifier
- An identifier that uniquely identifies an event.
- Event description
- The logged message string that appears for an event.
- Explanation
- Provides additional information to explain why the event occurred.
- Severity
- An indication of the level of concern for the condition. The severity is abbreviated in the event log to the first character. The following severities can be displayed:
Informational. The event was recorded for audit purposes, usually a user action or a change of states that is normal behavior.
Warning. The event is not as severe as an error, but if possible, the condition should be corrected before it becomes an error. It might also be a condition that requires additional monitoring or maintenance.
Error. The event is a failure or critical condition that impairs service or an expected function.
- User Action
- Indicates what actions you should perform to solve the event. Perform the steps listed in this section in the order shown until the problem is solved. If you cannot solve the problem after performing all steps, contact Lenovo Support.
- UEFI events organized by severity
The following table lists all UEFI events, organized by severity (Information, Error, and Warning). - FQXSFIO0005I : An intra-board UPI has been disabled on the link between processor [arg1] port [arg2] and processor [arg3]port [arg4] because of UPI topology downgrade.
An intra-board UPI has been disabled on the link between processor [arg1] port [arg2] and processor [arg3]port [arg4] because of UPI topology downgrade. - FQXSFIO0005M : An intra-board UPI failure has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4].
An intra-board UPI failure has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. - FQXSFIO0006I : An inter-board UPI has been disabled on the link between processor [arg1] port [arg2] and processor [arg3]port [arg4] because of UPI topology downgrade.
An inter-board UPI has been disabled on the link between processor [arg1] port [arg2] and processor [arg3]port [arg4] because of UPI topology downgrade. - FQXSFIO0006M : An inter-board UPI failure has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4].
An inter-board UPI failure has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. - FQXSFIO0008M : An intra-board UPI dynamic link width reduction has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4].
An intra-board UPI dynamic link width reduction has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. - FQXSFIO0009M : An inter-board UPI dynamic link width reduction has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4].
An inter-board UPI dynamic link width reduction has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. - FQXSFIO0013M : New added PCI device(s) at [arg1] triggered [arg2] out of resource.
New added PCI device(s) at [arg1] triggered [arg2] out of resource. - FQXSFIO0021I : PCIe DPC software triggering occurred in physical [arg1] number [arg2].
PCIe DPC software triggering occurred in physical [arg1] number [arg2]. - FQXSFIO0021J : PCIe Error Recovery has occurred in physical [arg1] number [arg2]. The [arg3] may not operate correctly.
PCIe Error Recovery has occurred in physical [arg1] number [arg2]. The [arg3] may not operate correctly. - FQXSFIO0022J : PCIe Link Width has degraded from [arg1] to [arg2] in physical [arg3] number [arg4].
PCIe Link Width has degraded from [arg1] to [arg2] in physical [arg3] number [arg4]. - FQXSFIO0023J : PCIe Link Speed has degraded from [arg1] to [arg2] in physical [arg3] number [arg4].
PCIe Link Speed has degraded from [arg1] to [arg2] in physical [arg3] number [arg4]. - FQXSFIO0024I : An error has been detected by the IEH on processor [arg1]. The type of IEH is [arg2]. The index of the IEH is [arg3]. The value of IehErrorStatus register is [arg4]. Please check error logs for additional downstream device error data.
An error has been detected by the IEH on processor [arg1]. The type of IEH is [arg2]. The index of the IEH is [arg3]. The value of IehErrorStatus register is [arg4]. Please check error logs for additional downstream device error data. - FQXSFIO0024M : An error has been detected by the IEH on processor [arg1]. The type of IEH is [arg2]. The index of the IEH is [arg3]. The value of IehErrorStatus register is [arg4]. Please check error logs for additional downstream device error data.
An error has been detected by the IEH on processor [arg1]. The type of IEH is [arg2]. The index of the IEH is [arg3]. The value of IehErrorStatus register is [arg4]. Please check error logs for additional downstream device error data. - FQXSFIO0025I : An error has been detected by the IIO on processor [arg1]. The index of the IIO stack is [arg2]. The type of IIO Internal Error is [arg3]. Please check error logs for additional downstream device error data.
An error has been detected by the IIO on processor [arg1]. The index of the IIO stack is [arg2]. The type of IIO Internal Error is [arg3]. Please check error logs for additional downstream device error data. - FQXSFIO0025M : An error has been detected by the IIO on processor [arg1]. The index of the IIO stack is [arg2]. The type of IIO Internal Error is [arg3]. Please check error logs for additional downstream device error data.
An error has been detected by the IIO on processor [arg1]. The index of the IIO stack is [arg2]. The type of IIO Internal Error is [arg3]. Please check error logs for additional downstream device error data. - FQXSFIO0035M : An Uncorrectable PCIe Error has Occurred at Segment 0x[arg1] Bus 0x[arg2] Device 0x[arg3] Function 0x[arg4]. The Vendor ID for the device is 0x[arg5] and the Device ID is 0x[arg6]. The physical [arg7] number is [arg8].
An Uncorrectable PCIe Error has Occurred at Segment 0x[arg1] Bus 0x[arg2] Device 0x[arg3] Function 0x[arg4]. The Vendor ID for the device is 0x[arg5] and the Device ID is 0x[arg6]. The physical [arg7] number is [arg8]. - FQXSFIO0036G : PCIe Correctable Error Threshold limit has been exceeded at Segment 0x[arg1] Bus 0x[arg2] Device 0x[arg3] Function 0x[arg4]. The Vendor ID for the device is 0x[arg5] and the Device ID is 0x[arg6]. The physical [arg7] number is [arg8].
PCIe Correctable Error Threshold limit has been exceeded at Segment 0x[arg1] Bus 0x[arg2] Device 0x[arg3] Function 0x[arg4]. The Vendor ID for the device is 0x[arg5] and the Device ID is 0x[arg6]. The physical [arg7] number is [arg8]. - FQXSFIO0041J : PCIe Leaky Bucket Event : [arg1] occurred at Segment [arg2] Bus [arg3] Device [arg4] Function [arg5]. The physical [arg6] number is [arg7].
PCIe Leaky Bucket Event : [arg1] occurred at Segment [arg2] Bus [arg3] Device [arg4] Function [arg5]. The physical [arg6] number is [arg7]. - FQXSFMA0001I : DIMM [arg1] Disable has been recovered. [arg2]
DIMM [arg1] Disable has been recovered. [arg2] - FQXSFMA0001M : DIMM [arg1] has been disabled due to an error detected during POST. [arg2]
DIMM [arg1] has been disabled due to an error detected during POST. [arg2] - FQXSFMA0002I : The uncorrectable memory error state has been cleared.
The uncorrectable memory error state has been cleared. - FQXSFMA0002M : An uncorrectable memory error has been detected on DIMM [arg1] at address [arg2]. [arg3]
An uncorrectable memory error has been detected on DIMM [arg1] at address [arg2]. [arg3] - FQXSFMA0004N : No system memory has been detected.
No system memory has been detected. - FQXSFMA0006I : [arg1] DIMM [arg2] has been detected, the DIMM serial number is [arg3].
[arg1] DIMM [arg2] has been detected, the DIMM serial number is [arg3]. - FQXSFMA0008I : DIMM [arg1] POST memory test failure has been recovered. [arg2]
DIMM [arg1] POST memory test failure has been recovered. [arg2] - FQXSFMA0008M : DIMM [arg1] has failed the POST memory test. [arg2]
DIMM [arg1] has failed the POST memory test. [arg2] - FQXSFMA0009I : Invalid memory configuration for Mirror Mode has been recovered.
Invalid memory configuration for Mirror Mode has been recovered. - FQXSFMA0009K : Invalid memory configuration for Mirror Mode. Please correct memory configuration.
Invalid memory configuration for Mirror Mode. Please correct memory configuration. - FQXSFMA0026G : Multi-bit CE occurred on DIMM [arg1], need to restart the system for DIMM Self-healing to attempt post package repair (PPR).[arg2]
Multi-bit CE occurred on DIMM [arg1], need to restart the system for DIMM Self-healing to attempt post package repair (PPR).[arg2] - FQXSFMA0026I : DIMM [arg1] Self-healing, attempt post package repair (PPR) succeeded. [arg2]
DIMM [arg1] Self-healing, attempt post package repair (PPR) succeeded. [arg2] - FQXSFMA0027G : Multi-bit CE occurred on DIMM [arg1] different rows.[arg2]
Multi-bit CE occurred on DIMM [arg1] different rows.[arg2] - FQXSFMA0027I : Invalid memory configuration (unsupported DIMM Population) recovered.
Invalid memory configuration (unsupported DIMM Population) recovered. - FQXSFMA0027K : Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid.
Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid. - FQXSFMA0027M : DIMM [arg1] Self-healing, attempt post package repair (PPR) failed. [arg2]
DIMM [arg1] Self-healing, attempt post package repair (PPR) failed. [arg2] - FQXSFMA0028M : DIMM [arg1] Self-healing, attempt post package repair (PPR) exceeded DIMM level threshold. [arg2]
DIMM [arg1] Self-healing, attempt post package repair (PPR) exceeded DIMM level threshold. [arg2] - FQXSFMA0029G : DIMM [arg1] Self-healing, attempt post package repair (PPR) failed: Insufficient rows available for repair. [arg2]
DIMM [arg1] Self-healing, attempt post package repair (PPR) failed: Insufficient rows available for repair. [arg2] - FQXSFMA0029I : The PFA of DIMM [arg1] has been deasserted after applying PPR for this DIMM. [arg2]
The PFA of DIMM [arg1] has been deasserted after applying PPR for this DIMM. [arg2] - FQXSFMA0047M : SPD CRC checking failed on DIMM [arg1]. [arg2]
SPD CRC checking failed on DIMM [arg1]. [arg2] - FQXSFMA0048M : DIMM [arg1] disabled due to PMIC failure during POST, DIMM identifier is [arg2].
DIMM [arg1] disabled due to PMIC failure during POST, DIMM identifier is [arg2]. - FQXSFMA0049M : DIMM [arg1] disabled due to memory module power failure. DIMM [arg2] detected and good, DIMM [arg3] not detected.
DIMM [arg1] disabled due to memory module power failure. DIMM [arg2] detected and good, DIMM [arg3] not detected. - FQXSFMA0050G : DRAM PFA threshold limit exceeded on DIMM [arg1] sub-channel [arg2] Rank [arg3] DRAM [arg4], DIMM identifier is [arg5].
DRAM PFA threshold limit exceeded on DIMM [arg1] sub-channel [arg2] Rank [arg3] DRAM [arg4], DIMM identifier is [arg5]. - FQXSFMA0052I : DIMM [arg1] has been disabled due to the error on DIMM [arg2].[arg3]
DIMM [arg1] has been disabled due to the error on DIMM [arg2].[arg3] - FQXSFMA0053G : An uncorrected memory error has been recovered by mirror on DIMM [arg1] at address [arg2].[arg3]
An uncorrected memory error has been recovered by mirror on DIMM [arg1] at address [arg2].[arg3] - FQXSFMA0053I : DIMM [arg1] re-enabled due to memory module combination updating.
DIMM [arg1] re-enabled due to memory module combination updating. - FQXSFMA0053M : DIMM [arg1] not defective but disabled due to unsupported memory module combination on CPU [arg2].
DIMM [arg1] not defective but disabled due to unsupported memory module combination on CPU [arg2]. - FQXSFMA0054G : Mirror failover operation was successful. DIMM [arg1] has failed over to the mirrored DIMM [arg2].[arg3]
Mirror failover operation was successful. DIMM [arg1] has failed over to the mirrored DIMM [arg2].[arg3] - FQXSFMA0055G : Mirror failover operation is skipped and page retire for uncorrectable error (at [arg1]) on DIMM [arg2] is reported to OS. [arg3]
Mirror failover operation is skipped and page retire for uncorrectable error (at [arg1]) on DIMM [arg2] is reported to OS. [arg3] - FQXSFMA0056I : Uncorrected memory error occurred on DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2].
Uncorrected memory error occurred on DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2]. - FQXSFMA0056M : An uncorrected recoverable memory error has been detected on DIMM [arg1] at address [arg2].[arg3] [arg4]
An uncorrected recoverable memory error has been detected on DIMM [arg1] at address [arg2].[arg3] [arg4] - FQXSFMA0057G : Page Retire PFA Threshold limit exceeded on DIMM [arg1] at address [arg2].[arg3] [arg4]
Page Retire PFA Threshold limit exceeded on DIMM [arg1] at address [arg2].[arg3] [arg4] - FQXSFMA0063I : A correctable memory error handled by ADDDC on DIMM [arg1]. DIMM identifier is [arg2].
A correctable memory error handled by ADDDC on DIMM [arg1]. DIMM identifier is [arg2]. - FQXSFMA0064M : DIMM [arg1] disabled due to memory module power failure. DIMM [arg2] detected and good.
DIMM [arg1] disabled due to memory module power failure. DIMM [arg2] detected and good. - FQXSFMA0065I : Multi-bit CE of DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2].
Multi-bit CE of DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2]. - FQXSFMA0066M : Memory address parity error occurred on CPU [arg1] channel [arg2] with DIMM [arg3].
Memory address parity error occurred on CPU [arg1] channel [arg2] with DIMM [arg3]. - FQXSFMA0067G : Errors per row counter threshold limit exceeded on DIMM [arg1] sub-channel [arg2] Rank [arg3] DRAM [arg4], need to restart the system for DIMM Self-healing to attempt post package repair (PPR), DIMM identifier is [arg5].
Errors per row counter threshold limit exceeded on DIMM [arg1] sub-channel [arg2] Rank [arg3] DRAM [arg4], need to restart the system for DIMM Self-healing to attempt post package repair (PPR), DIMM identifier is [arg5]. - FQXSFMA0067I : Errors per row counter threshold limit exceeded on DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2].
Errors per row counter threshold limit exceeded on DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2]. - FQXSFMA0076M : DIMM [arg1] is not supported, DIMM identifier is [arg2].
DIMM [arg1] is not supported, DIMM identifier is [arg2]. - FQXSFMA0077N : SMBus failure encountered when accessing to the SPD of DIMM [arg1].
SMBus failure encountered when accessing to the SPD of DIMM [arg1]. - FQXSFMA0078N : System encountered fatal error [arg1] during memory initialization.
System encountered fatal error [arg1] during memory initialization. - FQXSFMA0079I : NVRAM [arg1] corruption detected and recovered.
NVRAM [arg1] corruption detected and recovered. - FQXSFMA0082M : An uncorrected recoverable memory error has been detected on DIMM [arg1] and post package repair (PPR) recorded.
An uncorrected recoverable memory error has been detected on DIMM [arg1] and post package repair (PPR) recorded. - FQXSFMA0083M : An uncorrected recoverable memory error has been detected on DIMM [arg1] and post package repair (PPR) recording failed.
An uncorrected recoverable memory error has been detected on DIMM [arg1] and post package repair (PPR) recording failed. - FQXSFPU0016N : A processor within the system has failed the BIST.
A processor within the system has failed the BIST. - FQXSFPU0018N : CATERR(IERR) has asserted on processor [arg1].
CATERR(IERR) has asserted on processor [arg1]. - FQXSFPU0019N : An uncorrectable error has been detected on processor [arg1].
An uncorrectable error has been detected on processor [arg1]. - FQXSFPU0023G : Secure Boot Image Verification Failure Warning.
Secure Boot Image Verification Failure Warning. - FQXSFPU0027N : System uncorrectable error has occurred on Processor [arg1] Core [arg2] MC bank [arg3] with MC Status [arg4], MC Address [arg5], and MC Misc [arg6].
System uncorrectable error has occurred on Processor [arg1] Core [arg2] MC bank [arg3] with MC Status [arg4], MC Address [arg5], and MC Misc [arg6]. - FQXSFPU0030N : A firmware fault has been detected in the UEFI image.
A firmware fault has been detected in the UEFI image. - FQXSFPU0035N : A 3-strike timeout has occurred on processor [arg1].
A 3-strike timeout has occurred on processor [arg1]. - FQXSFPU0039G : 3rd party option rom of PCIe physical [arg1] number [arg2] failed secure boot verification.
3rd party option rom of PCIe physical [arg1] number [arg2] failed secure boot verification. - FQXSFPU0040G : Secure boot keys were reset to factory default.
Secure boot keys were reset to factory default. - FQXSFPU0062F : System uncorrected recoverable error happened in Processor [arg1] Core [arg2] MC bank [arg3] with MC Status [arg4], MC Address [arg5], and MC Misc [arg6].
System uncorrected recoverable error happened in Processor [arg1] Core [arg2] MC bank [arg3] with MC Status [arg4], MC Address [arg5], and MC Misc [arg6]. - FQXSFPU4033F : TPM Firmware recovery is in progress. Please DO NOT power off or reset system.
TPM Firmware recovery is in progress. Please DO NOT power off or reset system. - FQXSFPU4034I : TPM Firmware recovery is finished, rebooting system to take effect.
TPM Firmware recovery is finished, rebooting system to take effect. - FQXSFPU4035M : TPM Firmware recovery failed. TPM chip may be damaged.
TPM Firmware recovery failed. TPM chip may be damaged. - FQXSFPU4038I : TPM Firmware recovery successful.
TPM Firmware recovery successful. - FQXSFPU4040M : TPM selftest has failed.
TPM selftest has failed. - FQXSFPU4041I : TPM Firmware update is in progress. Please DO NOT power off or reset system.
TPM Firmware update is in progress. Please DO NOT power off or reset system. - FQXSFPU4042I : TPM Firmware update is finished, rebooting system to take effect.
TPM Firmware update is finished, rebooting system to take effect. - FQXSFPU4044I : The current TPM firmware version could not support TPM version toggling.
The current TPM firmware version could not support TPM version toggling. - FQXSFPU4050G : Failed to update TPM Firmware.
Failed to update TPM Firmware. - FQXSFPU4051G : Undefined TPM_POLICY found.
Undefined TPM_POLICY found. - FQXSFPU4052G : TPM_POLICY is not locked.
TPM_POLICY is not locked. - FQXSFPU4053G : System TPM_POLICY does not match the planar.
System TPM_POLICY does not match the planar. - FQXSFPU4056M : TPM card is changed, need install back the original TPM card which shipped with the system.
TPM card is changed, need install back the original TPM card which shipped with the system. - FQXSFPU4059I : User requested to skip freezing lock of AHCI-attached SATA drives. System UEFI accepted the request and will execute prior to OS boot.
User requested to skip freezing lock of AHCI-attached SATA drives. System UEFI accepted the request and will execute prior to OS boot. - FQXSFPU4060I : Skipped freezing lock of AHCI-attached SATA drives.
Skipped freezing lock of AHCI-attached SATA drives. - FQXSFPU4061I : Restored default locking behavior of AHCI-attached SATA drives.
Restored default locking behavior of AHCI-attached SATA drives. - FQXSFPU4062I : CPU debugging is deactivated.
CPU debugging is deactivated. - FQXSFPU4062M : CPU debugging is activated.
CPU debugging is activated. - FQXSFPU4080I : Host Power-On password has been changed.
Host Power-On password has been changed. - FQXSFPU4081I : Host Power-On password has been cleared.
Host Power-On password has been cleared. - FQXSFPU4082I : Host Admin password has been changed.
Host Admin password has been changed. - FQXSFPU4083I : Host Admin password has been cleared.
Host Admin password has been cleared. - FQXSFSM0008M : Boot permission timeout detected.
Boot permission timeout detected. - FQXSFSR0001M : [arg1] GPT corruption detected, DiskGUID: [arg2]
[arg1] GPT corruption detected, DiskGUID: [arg2] - FQXSFSR0002I : [arg1] GPT corruption recovered, DiskGUID: [arg2]
[arg1] GPT corruption recovered, DiskGUID: [arg2] - FQXSFSR0003G : The number of boot attempts has been exceeded. No bootable device found.
The number of boot attempts has been exceeded. No bootable device found. - FQXSFSR0003I : Boot OS successfully.
Boot OS successfully.
피드백 보내기