Working inside the solution with the power on
You might need to keep the power on with the solution cover removed to look at system information on the display panel or to replace hot-swap components. Review these guidelines before doing so.
The solution might stop and loss of data might occur when internal solution components are exposed to static electricity. To avoid this potential problem, always use an electrostatic-discharge wrist strap or other grounding systems when working inside the solution with the power on.
Avoid loose-fitting clothing, particularly around your forearms. Button or roll up long sleeves before working inside the solution.
Prevent your necktie, scarf, badge rope, or long hair from dangling into the solution.
Remove jewelry, such as bracelets, necklaces, rings, cuff links, and wrist watches.
Remove items from your shirt pocket, such as pens and pencils, in case they fall into the solution as you lean over it.
Avoid dropping any metallic objects, such as paper clips, hairpins, and screws, into the solution.