Skip to main content

Remove the external LCD diagnostics handset

Follow instructions in this section to remove the external LCD diagnostics handset.

About this task

To avoid possible danger, read and follow the following safety statement.
  • S014
    shock hazard
    CAUTION
    Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is authorized to remove the covers where the label is attached.
  • S017
    moving parts
    CAUTION
    Hazardous moving fan blades nearby. Keep fingers and other body parts away.
  • S033
    240VA shock hazard
    CAUTION

    Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

About this task
Attention
Read the Installation Guidelines to ensure that you work safely.

Procedure

  1. Turn off the corresponding compute node on which you are going to perform the task.
  2. Disconnect the external LCD diagnostics handset cable.
    1. Press and hold on the latch on top of the connector.
    2. Pull to disconnect the cable from the compute node.
    Figure 1. Disconnecting the external LCD diagnostics handset cable



    Disconnecting the external LCD diagnostics handset cable

After you finish

If you are instructed to return the component or optional device, follow all of the packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube