Skip to main content

Remove the cross braces

Use this information to remove the cross braces.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Turn off the corresponding DWC tray that you are going to perform the task on.

  • Disconnect all external cables from the enclosure.

  • Use extra force to disconnect QSFP cables if they are connected to the solution.

Procedure

  1. Make preparations for this task.
    1. Remove the tray from the enclosure. See Remove a DWC tray from the enclosure.
    2. Remove the tray cover. See Remove the tray cover.
  2. Remove the seven screws that secure the two brackets; then remove the brackets.
    Figure 1. Bracket removal
    Bracket removal
  3. Remove the front and the rear cross braces (12 Phillips #1 screws and 2 thumbscrews).
    Figure 2. Cross brace removal (SD650-I V3)
    Cross brace removal (SD650-I V3)
After you finish

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube