Skip to main content

Remove the external LCD diagnostics handset

Use this information to remove the external LCD diagnostics handset.

About this task

Attention
  • Read the following sections to ensure that you work safely.
  • Turn off the corresponding DWC tray that you are going to perform the task on.
    Note
    If Shared I/O adapters are installed, power off the auxiliary node (node 1/3/5/7/9/11) first, and then power off the primary node (node 2/4/6/8/10/12).

Procedure

Disconnect the external LCD diagnostics handset cable.
  1. ❶ Press the plastic clip on the plug forward.
  2. ❷ Hold the clip and remove the cable from the connector.
    Figure 1. Disconnecting the external LCD diagnostics handset cable




If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.