Skip to main content

Processor replacement

Use the following procedures to replace an assembled processor.

Attention
Before reusing a processor or heat sink, make sure you use Lenovo proven alcohol cleaning pad and thermal grease.
Important
The processor in your solution can throttle in response to thermal conditions, temporarily lowering its speed to reduce heat output. In instances where a few processor cores are throttled for an extremely short time period (100 ms or less), the only indication might be an entry in the operating system event log with no corresponding entry in the system XCC event log. If this situation occurs, the event can be ignored and processor replacement is not required.
  • Remove a processor
    This task has instructions for removing an assembled processor. This task requires a Torx T30 driver.
  • Install a processor
    This task has instructions for installing a processor. This task requires a Torx T30 driver.