Skip to main content

SD650 V2 tray

Use this information to route the cables for SD650 V2 trays.

ConnectX-6 Shared I/O adapter​

ConnectX-6 Shared I/O adapters comes in two types:

Table 1.
ConfigurationNVMe/SATA driveM.2 backplane
Configuration 1: Shared I/O A√√
Configuration 2: Shared I/O BX√

Refer to corresponding table to route the cables for ConnectX-6 Shared I/O adapters.

  • Shared I/O A

    Figure 1. Cable routing - Shared I/O A (with NVMe/SATA drives and M.2 backplane)
    Cable routing - Shared I/O A (with NVMe/SATA drives and M.2 backplane)
    1 NVMe/SATA drives4 Main adapter
    2 M.2 backplane5 350mm IPEX cable
    3 Auxiliary adapter 

  • Shared I/O B

    Figure 2. Cable routing - Share I/O B (with M.2 backplane)
    Cable routing - Share I/O B (with M.2 backplane)
    1 M.2 backplane3 Main adapter
    2 Auxiliary adapter4 350mm IPEX cable