Node specifications
A summary of the features and specifications of the compute node and the GPU node.
Compute node specifications
The SD650 V2 tray contains two compute nodes while the SD650-N V2 tray contains one compute node and one GPU node.
Specification | Description |
---|---|
Processor (depending on the model) |
Note
|
Memory | See Memory module installation rules and order for detailed information about memory configuration and setup.
Important The tray only supports fully populated processor and memory configuration (2 processors and 16 DIMMs). |
Drive bays |
Attention As a general consideration, do not mix standard 512-byte and advanced 4-KB format drives in the same RAID array because it might lead to potential performance issues. |
M.2 drive/backplane | ThinkSystem M.2 backplane supports up to two identical M.2 drives. Supports 2 different physical sizes of M.2 drives:
See Install an M.2 drive into the M.2 backplane for supported M.2 drive configurations. |
RAID |
|
Expansion slots | Supports up to two Half-Height Half-Length x16 Gen 4 PCIe slots. |
Video controller (integrated into Lenovo XClarity Controller) |
Note Maximum video resolution is 1920 x 1200 at 60 Hz. |
Input/Output (I/O) features |
|
Minimum configuration for debugging |
|
GPU node specifications
Specification | Description |
---|---|
GPU |
|
Expansion slots | Supports one Half-Height Half-Length x16 Gen 4 PCIe slot. |
Minimum configuration for debugging |
|