Skip to main content

46 : PS1_Throttle_Assert

PS1_Throttle_Assert

Power supply is having over-current condition.

Severity

Critical

User Action

Complete the following steps:

  1. Make sure PSU power cord is properly plugged in.
  2. Un-install node one by one to identify if any of the node is causing the OC condition.
  3. If Throttle is still asserted when all nodes are removed from chassis, do the following: Unplug power supplies power cord and removed all power supplies from chassis. Plug power cord back into power supply while power supply is outside of chassis. If PSU orange LED is turned off under this circumstance, replace mid-plane. If LED is still lit, replace PSU.