Skip to main content

Install the FPC

Use this information to install the FPC.

disconnect all power
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
Use eye protection
Eye protection should be worn for this procedure.

Before you install the FPC:

  1. Read the Installation Guidelines to ensure that you work safely.

  2. Remove EMC shields.
    Figure 1. Upper EMC shield removal
    Upper EMC shield removal
    Figure 2. Lower left EMC shield removal
    Lower left EMC shield removal

Complete the following steps to install the FPC.

  1. Install the FPC module support bracket.
  2. Align the FPC module with the support bracket; then, slide the FPC module into place and rotate the latch.
    Figure 3. FPC module installation
    FPC module installation