Install the rear top cover
Follow instructions in this section to install the rear top cover.
About this task
Attention
Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your server.
Make sure that all internal cables are correctly routed. See ThinkEdge SE100 Enclosure Internal Cable Routing Guide.
Procedure
Install the rear top cover.
Place the rear top cover on the top of the enclosure with both sides aligned.
Tighten the six captive screws to secure the rear top cover.
After you finish
- Complete the parts replacement. See Complete the parts replacement.
- Install the enclosure to the rack. See Install a node to the rack.
Give documentation feedback