Skip to main content

Technical specifications

Summary of the technical specifications of server. Depending on the model, some features might not be available, or some specifications might not apply.

Processor
Supports multi-core Intel Core Ultra 200H series processors in Ball-Grid Array (BGA) package:
  • Scalable up to 16 cores
  • Supports TDP up to 28W

For a list of supported processors, see: Lenovo ServerProven website.

Memory

See Memory module installation rules and order for detailed information about memory configuration and setup.

  • Slots: two dual inline memory module (DIMM) slots (two channels, one DIMM per channel)
  • Memory module types:
    • TruDDR5 6400MHz CSODIMM
    • TruDDR5 5600MHz SODIMM
  • Capacity:
    • CSODIMM: 8 GB (1Rx16), 16 GB (1Rx8), and 32 GB (2Rx8)
    • SODIMM: 16 GB (1Rx8), and 32 GB (2Rx8)
  • Total capacity:
    • Minimum: 8 GB
    • Maximum: 64 GB
Note
Make sure to follow the following rules when installing the memory module to slot 1 and 2:

  • Mixing SODIMM and CSODIMM between slot 1 and 2 is not allowed.

  • All memory modules to be installed must be the same capacity.

For a list of supported memory modules, see: Lenovo ServerProven website.

M.2 Drive
M.2 boot drive:

  • Up to one 80 mm (2280) M.2 SATA/NVMe boot drive on slot 1

M.2 storage drives:
  • Up to two M.2 NVMe storage drives on slot 2 and 3, of the following drive form factor
    • 80 mm (2280)
    • 110 mm (22110)
Note
  • Make sure to follow the following rules when installing M.2 drives to slot 2 and slot 3:
    • All M.2 drives installed should be identical in form factor.
    • Mixing M.2 drives of different vendors and capacity is allowed.

For a list of supported M.2 drives, see: Lenovo ServerProven website.

Expansion slots
One PCIe slot supports up to 75W:

  • PCI Express 4.0 x16 (x8 lanes), HH/HL

Graphics processing unit (GPU)
The server supports the following GPU configuration:
  • One PCIe x16, single wide, low profile GPU adapter
Integrated functions and I/O connectors
  • Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video controller, and remote keyboard, video, mouse, and remote drive capabilities.

  • Front I/O connectors

    • Two USB 3.2 Gen2 (10 Gbps) Type-A connectors
    • Two USB 3.2 Gen 2 (10 Gbps) Type-C connector with display support
    • One RJ-45 RS-232 serial console connector for OS/BIOS or XCC
    • Two HDMI 2.0 connectors

  • Rear I/O connectors

    • Two USB Type-C power connectors
      • Power connector 2 with Lenovo XClarity Controller (XCC) management
    • One XCC system management port (10/100/1000 Mbps RJ-45) on the rear to connect to a systems-management network. This RJ-45connector is dedicated to the Lenovo XClarity Controller functions and runs at 10/100/1000 Mbps speed.
    • Two 1GbE RJ-45 connectors
    • Two USB 3.2 Gen2 (10 Gbps) Type-A connectors
    • One Fan control board connector for enclosure cooling usage
Note

It is recommended to connect a monitor to USB port 3 (with display support) while powering on the system. The output of error messages during system booting is from USB port 3. After entering the OS, if the monitor connecting to USB port 3 becomes blank, connect the monitor to another display port. See Monitor and video problems for more information.

Network
Ethernet connectors
  • Two 1GbE RJ-45 connectors
Ethernet adapters
  • Support one low-profile PCIe Ethernet adapter
System fan
Supported fans vary by configuration.

  • Node: Two 65mm x 13mm non-hot-swap frameless blower fans

  • Ethernet adapter expansion kit: Two 50mm x 50mm x 10mm non-hot-swap fans

Note
See System fan numbering for more information.
Electrical input
Following is the list of supported power supply types with 1+1 redundancy:
  • Up to two 140W (230V/115V) external power adapters
    Note
    When one or two 140W external power adapters are installed, keep ambient temperature lower than 45°C, and the following mounting types are supported:
    • Mounting option: Desktop mount/Wall mount/Ceiling mount/DIN-rail mount
    Important
    Power adapters and redundant power adapters in the enclosure must be with the same power rating, wattage or level.

    As required by COMMISSION REGULATION (EU) 2019/424 of 1 March 2020 laying down ecodesign requirements for servers and data storage products (ErP lot 9).

ThinkEdge 140W 230V/115V External Power Supply

Information published

Value and precision

Unit

Manufacturer’s name

Lenovo

-

Model identifier

Adapter

-

Input voltage

100-240

V

Input AC frequency

50-60

Hz

Output voltage

28.0

V

Output current

5.0

A

Output power

140.0

W

Average active efficiency

  • FSP: 91.0 / 91.0
  • Delta: 92.1 / 91.6

%

Efficiency at low load (10 %)

  • FSP: 88.5 / 87.5
  • Delta: 77.4 / 77.4

%

No-load power consumption

  • FSP: 0.065 / 0.08
  • Delta: 0.078 / 0.047

W

Minimal configuration for debugging

  • One DRAM memory module in DIMM slot 1

  • One 140W power supply

  • One 2280 SATA/NVMe M.2 drive in slot 1

  • Two system fans

Operating systems
Supported and certified operating systems:

  • Microsoft Windows

  • Canonical Ubuntu

References: