Skip to main content

Install the front operator panel

Use this information to install the front operator panel.

Before you install the front operator panel, complete the following steps:
  1. Read the following sections to ensure that you work safely.

  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

Procedure

  1. Slide the front operator panel into the assembly bay.
  2. Install the screw to secure the front operator panel.
  3. Carefully connect the two Y-cable connectors.
  4. Carefully route the cable underneath the metal pull tab holder.
    Figure 1. Front operator panel installation
    Front operator panel installation

After you install the front operator panel, complete the following steps:

  2. Install the M.2 WLAN/LTE wireless adapter if removed (see Install the M.2 WLAN/LTE wireless adapter).

  3. Install the lock position switch if removed (see Install the lock position switch).

  4. Install the node if needed (see Install a node).

  5. Reconnect power cords and all external cables.

Demo video