Remove a power adapter
Use this information to remove a power adapter.
Before you remove a power adapter, complete the following steps:
- Read the following sections to ensure that you work safely.
Turn off the server. Disconnect the power cords and all external cables (see Power off the server).
Remove the enclosure from the rack if necessary.
If you are removing a power adapter while a node is installed in an enclosure, complete the following steps.
Remove the two screws.
Slightly push the bracket frontward and remove it from the enclosure.
E1 Enclosure (1U 2-node)Figure 1. Bracket removal
E2 Enclosure (2U 2-node)Figure 2. Bracket removal
Carefully tilt the power adapter up and remove it from the cage.
E1 Enclosure (1U 2-node)Figure 3. Power adapter removal
E2 Enclosure (2U 2-node)Figure 4. Power adapter removal
If you are removing a power adapter installed in a power adapter bracket, complete the following steps.
Loosen the thumbscrew.
Remove the tab from the power adapter bracket.
Slide the power adapter out of the power adapter bracket.NoteSee
Configuration Installation Guide for the DIN rail configuration and wall-mounted configuration installation details if necessary.Figure 5. Power adapter removal
If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.