Skip to main content

Remove the dust filter in locking bezel

Use this information to remove the dust filter in locking bezel.

Before you remove the dust filter in locking bezel, complete the following steps:
  1. Read the following sections to ensure that you work safely.

  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

  3. Remove the node from the enclosure if needed (see Remove a node).

  4. For optimal server operation, make sure to install a replacement dust filter after removing one.

Procedure

  1. Open the latch to remove the dust filter holder out of the locking bezel.
    Figure 1. Dust filter removal
    Dust filter removal
  2. Remove the dust filter out of the locking bezel.
    Figure 2. Dust filter removal
    Dust filter in locking bezel removal

If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.