FQXSPMA0002N : Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
This message is for the use case when an implementation has detected a Memory DIMM configuration error has been corrected.
Critical - Memory
SNMP Trap ID
Automatically Notify Support
Complete the following steps:
- If the DIMM configuration was changed prior to this failure, verify that the DIMMs are installed in the correct population sequence.
- Reseat the DIMM that failed POST memory test and the DIMMs on adjacent slots if populated. Boot to F1 setup and enable the DIMM. Reboot the system.
- If the DIMMs have been upgraded just prior to the issue than update UEFI to the latest version.
- If the problem persists, collect Service Data logs.
- Contact Lenovo Support.