Compute node hardware setup

To set up the compute node, install any options that have been purchased, cable the compute node, configure and update the firmware, and install the operating system.

Compute node setup checklist
Use the compute node setup checklist to ensure that you have performed all tasks that are required to set up your compute node.
Installation Guidelines
Use the installation guidelines to install components in your server.
Install compute node hardware options
This section includes instructions for performing initial installation of optional hardware. Each component installation procedure references any tasks that need to be performed to gain access to the component being replaced.
Install a compute node
Use this information to install a compute node.
Power on the compute node
Use this information for details about power on the compute node.
Validate compute node setup
After powering up the compute node, make sure that the LEDs are lit and that they are green.
Power off the compute node
Use this information for details about turning off the compute node.

Give documentation feedback