Skip to main content

Remove the VGA cable

Use this information to remove the VGA cable.

Before you remove the VGA cable, complete the following steps:

  1. Read Safety and Installation Guidelines to ensure that you work safely.

  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

  3. If server is installed in a rack, remove the server from the rack.

  4. Remove the top cover (see Remove the top cover).

To remove the VGA cable, complete the following steps:

  1. Press the VGA cable latch and disconnect the cable from the system board.
    Attention
    To avoid damaging the system board, make sure to follow the instructions in Internal cable routing when disconnecting cables from the system board.
    Figure 1. VGA cable removal
    VGA cable removal
  2. Use a tool to press both clips; then, pull the VGA cable cover out.
    Figure 2. VGA cable removal
    VGA cable removal
  3. Remove the screws that secure the VGA cable; then, pull the VGA cable out of the server.
    Figure 3. VGA cable removal
    VGA cable removal

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.