Skip to main content

Install the front operator panel (3.5-inch HDD model)

Use this information to install the front operator panel (3.5-inch HDD model).

Before you install the front operator panel (3.5-inch HDD model), complete the following steps:
  1. Read the following section(s) to ensure that you work safely.

To install the front operator panel (3.5-inch HDD model), complete the following steps:

  1. Slide the front operator panel and cables into the slot on the front server.
    Figure 1. Front operator panel (3.5-inch HDD model) installation
    Front operator panel (3.5-inch HDD model) installation
  2. Install the two screws that secure the front operator panel.
    Figure 2. Front operator panel (3.5-inch HDD model) installation
    Front operator panel (3.5-inch HDD model) installation
  3. Connect the front operator and USB cables to the system board.
    Figure 3. Front operator panel installation
    Front operator panel installation

After you install the front operator panel (3.5-inch HDD model), complete the following steps:

  1. Install the top cover onto the server (see Install the top cover).

  2. Install the server into the rack if necessary.

  3. Reconnect power cords and all external cables.

Demo video

Watch the procedure on YouTube