Skip to main content

Install a RAID super capacitor module

Use this information to install a RAID super capacitor module.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening

Before installing a RAID super capacitor module, touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.

To install a RAID super capacitor module, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

Figure 1. Installation of a RAID super capacitor module
Installation of a RAID super capacitor module

  1. Insert the RAID super capacitor module into the slot at the bottom of the air baffle as shown.
  2. Gently press the tab on the air baffle as shown.
  3. Press down the RAID super capacitor module to install it into the slot.

After installing the RAID super capacitor module, connect the RAID super capacitor module to a RAID adapter with the extension cable that comes with the RAID super capacitor module.