Skip to main content

Install a system fan

Use this information to install a system fan.

Read the installation GuidelinesATTENTION: Static Sensitive Device Ground package before opening
S033
240VA shock hazard
CAUTION

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

S017
moving parts
CAUTION
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Before installing a system fan:

  1. Remove the fan filler.

  2. Touch the static-protective package that contains the new system fan to any unpainted surface on the outside of the server. Then, take the new system fan out of the package and place it on a static-protective surface.

To install a system fan, complete the following steps:
Note
The fan you want to install might be different from the following illustration, but the installation method is the same.

Watch the procedure

A video of this procedure is available at YouTube.

Figure 1. System fan installation
System fan installation

  1. Align the two holes in the system fan with the two pins on the chassis.
  2. Press the system fan down until it is seated correctly in the slot. Ensure that the fan connector is installed correctly to the connector on the system board.