Remove the air baffle
Use this information to remove the air baffle.
S033
![240VA shock hazard](240VA_shock_hazard-126.png)
![240VA shock hazard](240VA_shock_hazard-126.png)
CAUTION
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.
S017
![moving parts](moving_fan_blades-126.png)
![moving parts](moving_fan_blades-126.png)
CAUTION
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Before removing the air baffle, if there is a RAID super capacitor module installed on the bottom of the air baffle, disconnect the RAID super capacitor module cable first.
To remove the air baffle, complete the following step:
Watch the procedure
A video of this procedure is available at YouTube.
Figure 1. Air baffle removal
![Air baffle removal](sr570_rm_airbaffle-450.png)
![Air baffle removal](sr570_rm_airbaffle-450.png)
Grasp the air baffle and carefully lift it out of the server.
Attention
For proper cooling and airflow, install the air baffle before you power on the server. Operating the server with the air baffle removed might damage server components.
After removing the air baffle, begin installing any options that you have purchased.
Give documentation feedback