Skip to main content

Remove a system fan

Use this information to remove a system fan. You can remove a hot-swap fan without powering off the server, which helps you avoid significant interruption to the operation of the system.

Read the installation GuidelinesATTENTION: Static Sensitive Device Ground package before opening
S033
240VA shock hazard
CAUTION

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

S017
moving parts
CAUTION
Hazardous moving fan blades nearby. Keep fingers and other body parts away.

Before removing a system fan:

  1. Remove the top cover. See Remove the top cover.

  2. Remove the air baffle. See Remove the air baffle.

To remove a system fan, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

Figure 1. System fan removal
System fan removal

  1. Press the fan cage bracket to the front of the server.
  2. Grasp the top of the system fan with your fingers, and lift the fan out of the server.

After removing the system fan:

  1. Install a new system fan or install a fan filler to cover the place. See Install a system fan.

  2. If you are instructed to return the old system fan, follow all packaging instructions and use any packaging materials that are provided.