2,5 Zoll (10 AnyBay)
| Configuration | Rear BP | Storage controller | ||
| Qty. | Type | Qty. | Type | |
| Config. 1 | 1 | SFF 16i RAID/HBA | ||
| Config. 2 | 1 | SFF 16i RAID(Tri-mode) | ||
| Config. 3 | 1 | 2 x 2.5" SAS/SATA | 1 | SFF 16i RAID/HBA |
| Config. 4 | 1 | 2 x 2.5" NVMe | 1 | SFF 16i RAID/HBA |
In den folgenden Abschnitten finden Sie die für Ihre Serverkonfiguration geltenden Informationen zur Kabelführung.
Konfiguration 1:
Front BP: 10 x 2.5'' AnyBay BP
Anmerkung
Die mit einem Sternchen (*) markierten Anschlüsse werden NICHT bei der Konfiguration einer einzelnen CPU benötigt.
| Config. | Front BP | System board | Storage controller | |
| SFF 16i RAID/HBA | SFF 16i RAID(Tri-mode) | |||
| 1 | NVMe 0-1 | PCIe 1, PCIe 2 | ||
| NVMe 2-3 | PCIe 3 | |||
| *NVMe 4-5 | *PCIe 7 | |||
| *NVMe 6-7 | *PCIe 8 | |||
| *NVMe 8-9 | *PCIe 6 | |||
| SAS 0, SAS 1 | Gen 4: C 0 Gen 3: C 0, C 1 | |||
| SAS 2 | Gen 3: C 2 | |||
| 2 | SAS 0, SAS 1 | Gen 4: C 0 | ||
| SAS 2 | Gen 4: C 1 | |||
Beispiel
Abbildung 1. Configuration 1
Configuration 2 – 3:
Front BP: 10 x 2.5'' AnyBay BP
Rear BP: 2 x 2.5'' NVMe BP/ 2 x 2.5'' SAS/SATA BP
| Config. | Front BP | Rear BP | System board | Storage controller |
| SFF 16i RAID/HBA | ||||
| 3 | NVMe 0-1 | PCIe 1, PCIe 2 | ||
| NVMe 2-3 | PCIe 3 | |||
| NVMe 4-5 | PCIe 7 | |||
| NVMe 6-7 | PCIe 8 | |||
| NVMe 8-9 | PCIe 6 | |||
| SAS 0, SAS 1 | Gen 4: C 0 Gen 3: C 0, C 1 | |||
| SAS 2 | SAS | Gen 4: C 1 Gen 3: C 2, C 3 | ||
| 4 | NVMe 0-1 | PCIe 1, PCIe 2 | ||
| NVMe 2-3 | PCIe 3 | |||
| NVMe 4-5 | PCIe 7 | |||
| NVMe 6-7 | PCIe 8 | |||
| NVMe 8-9 | PCIe 6 | |||
| SAS 0, SAS 1 | Gen 4: C 0 Gen 3: C 0, C 1 | |||
| SAS 2 | Gen 4: C 1 Gen 3: C 2 | |||
| NVMe 0, NVMe 1 | PCIe 9 |
Beispiel
Abbildung 2. Konfiguration 3
Feedback geben