Install the security bezel

Use this information to install the security bezel.

Procedure

1. If you have removed the rack latches, reinstall them. See Install the rack latches.
2. If the key is held inside the security bezel, remove it out of the security bezel.
   1. Press the latch to release the key.
   2. Remove the key from the retaining clip in the shown direction.
   Figure 1. Key removal
   

   

   
   
3. Carefully insert the tab on the security bezel into the slot on the right rack latch. Then, press and hold the blue release latch and rotate the security bezel inward until the other side clicks into place.
   Figure 2. Security bezel installation
   

   

   
   
4. Use the key to lock the security bezel to the closed position.
   Figure 3. Locking the security bezel