Skip to main content

Remove an intrusion switch

Use this information to remove an intrusion switch.

About this task

  • Read Installation guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.


  1. Remove the top cover. See Remove the top cover.
  2. Disconnect the cable of the intrusion switch from the system board. For the location of the intrusion switch connector and cable routing information, refer to System board and Intrusion switch cable routing.
  3. Slide the intrusion switch as shown to remove it.
    Figure 1. Intrusion switch removal
    Intrusion switch removal

After you finish

If you are instructed to return the old intrusion switch, follow all packaging instructions and use any packaging materials that are provided.

Demo video

Watch the procedure on YouTube