Skip to main content

Remove the internal CFF RAID/HBA adapter

Use this information to remove the internal CFF RAID/HBA adapter.

About this task

Attention

  • Read Installation guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

  1. Remove the top cover. See Remove the top cover.
  2. Remove any components that may impede access to the internal CFF RAID/HBA adapter.
  3. Disconnect all cables from the internal CFF RAID/HBA adapter.
    Attention
    To avoid damaging the system board, make sure to follow the instructions in Internal cable routing when disconnecting cables from the system board.
  4. Lift the release pin, slightly slide the internal CFF RAID/HBA adapter as shown, and carefully lift it out of the chassis.
    Figure 1. Internal CFF RAID/HBA adapter removal
    Internal CFF RAID/HBA adapter removal

After you finish

If you are instructed to return the old internal CFF RAID/HBA adapter, follow all packaging instructions and use any packaging materials that are provided.

Demo video

Watch the procedure on YouTube