CRU parts replacement
This section provides installation and removal procedures for all CRU parts.
Note
If you replace a part, such as an adapter, that contains firmware, you might also need to update the firmware for that part. For more information about updating firmware, see Firmware updates.
- Installation Guidelines
Before installing components in your server, read the installation guidelines. - Air baffle replacement
Use this information to remove and install the air baffle. - Cable holder replacement
Use this information to remove and install the cable holders. - CMOS battery replacement
Use this information to remove and install the CMOS battery. - Front I/O assembly replacement
Use this information to remove and install the media bay. - GPU replacement
Use this information to remove and install a GPU adapter. - Hot-swap drive replacement
Use this information to remove and install a hot-swap drive. You can remove or install a hot-swap drive without turning off the server, which helps you avoid significant interruption to the operation of the system. - Hot–swap drive backplane replacement
Use this information to remove and install a hot-swap-drive backplane. - Hot-swap rear/middle drive cage replacement
Use this information to remove and install the 2.5-inch or 3.5-inch rear drive cage. - Hot-swap power supply unit replacement
Use this information to remove and install a power supply unit. - Internal CFF adapter replacement
Use this information to remove and install the internal CFF RAID adapter, internal CFF HBA adapter, or internal CFF RAID expander adapter. - Intrusion switch replacement
Use this information to remove and install the intrusion switch. The intrusion switch informs you that the server cover is not properly installed or closed by creating an event in the system event log (SEL). - M.2 adapter and M.2 drive replacement
Use this information to remove and install the M.2 adapter and M.2 drive. - Memory module replacement
Use this information to remove and install a memory module. - OCP 3.0 Ethernet adapter replacement
Use this information to remove and install the OCP 3.0 Ethernet adapter. - Rack latches replacement
Use this information to remove and install the rack latches. - RAID super capacitor module replacement
The RAID super capacitor module protects the cache memory on the installed RAID adapter. Use this information to remove and install a RAID super capacitor module. - Rearwall bracket replacement
Use this information to remove and install a rearwall bracket. - PCIe adapter and riser assembly replacement
Use this information to remove and install a riser card. - Serial port module replacement
Use this information to remove and install a serial port module. - Security bezel replacement
Use this information to remove and install the security bezel. - System fan replacement
Use this information to remove and install a system fan. - System fan cage replacement
Use this information to remove and install the system fan cage. - Top cover replacement
Use this information to remove and install the top cover. - Complete the parts replacement
Use this information to complete the parts replacement.
Give documentation feedback