Baies d’unité avant 8 x 2,5 pouces (AnyBay)
Cette section fournit des informations sur le cheminement des câbles pour le modèle de serveur avec huit baies d’unité avant 2,5 pouces.
| Configuration | Storage controllers | |
| Qty. | Type | |
| Config. 1 | 1 | SFF 8i RAID/HBA |
| Config. 2 | 1 | SFF 8i RAID (Tri-Mode) |
| Config. 3 | 1 | SFF 16i RAID/HBA |
| Config. 4 | 1 | SFF 16i RAID (Tri-Mode) |
| Config. 5 | 1 | CFF 16i RAID/HBA |
| Config. 6 | 1 | CFF 16i RAID (Tri-Mode) |
Configuration 1 – 6:
BP1: 8 x 2.5'' AnyBay BP
| Config. | Front BP | System board | Storage controller | |||
| SFF 8i RAID/HBA | SFF 8i RAID(Tri-Mode) | SFF 16i RAID/HBA | SFF 16i RAID (Tri-Mode) | |||
| 1 | BP1:NVMe 0–1 | PCIe 1, PCIe 2 | ||||
| BP1: NVMe 2–3 | PCIe 3 | |||||
| BP1: NVMe 4–5 | PCIe 7 | |||||
| BP1: NVMe 6–7 | PCIe 8 | |||||
| BP1: SAS | Gen 4: C 0 Gen3: C 0, C 1 | |||||
| 2 | BP1: SAS | C 0 | ||||
| 3 | BP1:NVMe 0–1 | PCIe 1, PCIe 2 | ||||
| BP1: NVMe 2–3 | PCIe 3 | |||||
| BP1: NVMe 4–5 | PCIe 7 | |||||
| BP1: NVMe 6–7 | PCIe 8 | |||||
| BP1: SAS | Gen 4: C 0 Gen3: C 0, C 1 | |||||
| 4 | BP1: SAS | C 0 | ||||
| Config. | Front BP | System board | Storage controller | |
| CFF 16i RAID/HBA | CFF 16i RAID (Tri-Mode) | |||
| 5 | BP1:NVMe 0–1 | PCIe 1, PCIe 2 | ||
| BP1: NVMe 2–3 | PCIe 3 | |||
| BP1: NVMe 4–5 | PCIe 7 | |||
| BP1: NVMe 6–7 | PCIe 8 | |||
| BP1: SAS | C 0, C 1 | |||
| PCIe 6 | MB | |||
| 6 | BP1: SAS | C 0, C 1 | ||
| PCIe 6 | MB | |||
Exemple
Figure 1. Configuration 3
Envoyer des commentaires