Skip to main content

Disassemble the retimer assembly for recycle

Follow the instructions in this section to disassemble the retimer assembly before recycling.

About this task

Before disassembling the retimer assembly:

  1. Remove the retimer assembly from the server. See Remove the retimer assembly.

  2. Refer to local environmental, waste or disposal regulations to ensure compliance.

Procedure

  1. Remove the following components as illustrated:

    • Nine screws (PH2 screwdriver)

  2. Separate the retimer assembly from the supporting sheet metal.
    Figure 1. Disassembling the retimer assembly


After you finish

After disassembling the system board, recycle the unit in compliance with local regulations.