Skip to main content

Install the shipping bracket

Use this information to install the shipping bracket.

To install the shipping bracket, complete the following steps:

Figure 1. Installing the shipping bracket
Enclosure removal

  1. Optionally, remove the top of the cable opening on the shipping bracket if the server is already cabled.
  2. Align the cutouts on each side of the shipping bracket with the thumbscrews on the front of the server.
  3. Slide the shipping bracket on to the front of the server, securing it with the four Phillips, M5 x 22 mm screws (silver).
  4. If you removed the top of the cable opening, reinstall it. Secure it to the shipping bracket with the four screws.
Note
Make sure that you remove the shipping bracket before you power on the server.