The SXM5 GPU Model parts list
Identify each of the components that is available for your server with the parts list.
Go to Lenovo Data Center Support and navigate to the support page for your server.
Click .
Enter the serial number to view a listing of parts for your server.
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.
T1: Tier 1 customer replaceable unit (CRU). Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
F: Field replaceable unit (FRU). FRUs must be installed only by trained service technicians.
C: Consumable and Structural parts. Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
| Index | Description | Type |
|---|---|---|
For more information about ordering parts:
| ||
| 1 | Top cover | T1 |
| 2 | Memory module | T1 |
| 3 | System I/O board | F |
| 4 | Firmware and RoT security module | F |
| 5 | Processor | F |
| 6 | CMOS battery (CR2032) | C |
| 7 | Processor board | F |
| 8 | Processor heat sink | F |
| 9 | MicroSD card | T1 |
| 10 | Power supply unit | T1 |
| 11 | SXM5 GPU power distribution board | F |
| 12 | Power supply unit filler | C |
| 13 | Intrusion switch | T1 |
| 14 | Power distribution board | T2 |
| 15 | PCIe riser | T2 |
| 16 | PCIe adapter | T1 |
| 17 | Chassis | F |
| 18 | Flash power module holder | C |
| 19 | Flash power module | T1 |
| 20 | OCP module filler | C |
| 21 | Front I/O expansion board carrier | T1 |
| 22 | OCP module | T1 |
| 23 | Front I/O expansion board | T2 |
| 24 | SXM5 GPU board assembly retention bracket | T1 |
| 25 | OSFP port card | T2 |
| 26 | 2x2 2.5-inch drive filler | C |
| 27 | 2.5-inch drive backplane module | T1 |
| 28 | 2.5-inch drive cage | T1 |
| 29 | 1x1 2.5-inch drive filler | C |
| 30 | 2.5-inch hot-swap drive | T1 |
| 31 | E3.S drive cage | T1 |
| 32 | E3.S drive cage cover | T1 |
| 33 | E3.S drive filler | C |
| 34 | E3.S hot-swap drive | T1 |
| 35 | E3.S drive backplane module | T1 |
| 36 | E3.S drive cage filler | C |
| 37 | Front drive tray | T1 |
| 38 | Front operator panel | T1 |
| 39 | CX-7 carrier board | F |
| 40 | CX-7 heat sink | F |
| 41 | CX-7 mezz board | F |
| 42 | SXM5 PCIe switch board | F |
| 43 | Interposer card | F |
| 44 | Rubber pad | F |
| 45 | Front I/O module | T1 |
| 46 | Cable | T1 |
| 47 | Mounting ears | T1 |
| 48 | SXM5 GPU board | F |
| 49 | SXM5 GPU | F |
| 50 | SXM5 GPU board assembly | F |
| 51 | SXM5 PCM Kit | F |
| 52 | Putty pad kit | F |
| 53 | Lenovo NeptuneTM liquid-to-air (L2A) hybrid cooling module | F |
| 54 | Fan | T1 |
| 55 | Fan cage | T1 |
| 56 | Air baffle | T1 |
| 57 | SR675 V3 water loop service kit | F |
| 58 | M.2 drive backplane | T1 |
| 59 | M.2 drive retainer | C |
| 60 | M.2 drive | T1 |