Skip to main content

FQXPMEM0007M : Diagnostic image cannot be launched as "Console Redirection" is enabled

Diagnostic image cannot be launched as "Console Redirection" is enabled

Severity

Error

User Action

  1. Disable “Configure Console Redirection” in UEFI Setup by following below steps: - Go to F1 Setup -> System Settings -> Devices and I/O Ports-> Console Redirection Settings -> - Select "Console Redirection" - Change the setting to “Disable” and save - Next reboot the system.
  2. Perform AC reset or virtual reseat.
    Note
    When performing AC reset, after powering off AC, wait several seconds before powering on AC. After AC power is restored, power on the host system.
  3. If the problem persists, contact technical support.