Skip to main content

Install the security bezel

Follow the instructions in this section to install the security bezel.

About this task

  • Go over Installation Guidelines to ensure that you work safely.

  • If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover, or remove the server from the rack.


  1. Insert the tabs on the security bezel into the slots on the right rack handle; then, press and hold the release latch, and rotate the security bezel towards the chassis until the other side clicks into place.
    Figure 1. Installing the security bezel

  2. Insert and rotate the key counterclockwise to lock the security bezel.
    Figure 2. Locking the security bezel