FQXSPCA0015J : Sensor [SensorElementName] has transitioned from normal to non-critical state.
Sensor [SensorElementName] has transitioned from normal to non-critical state.
This message is for the use case when an implementation has detected a Sensor transitioned to non-critical from normal.
Warning - Temperature
SNMP Trap ID
Automatically Notify Support
Complete the following steps until the problem is solved:
- Check the XCC event log for any fan- or cooling-related issues.
- Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are correctly installed in place.
- Make sure that the room temperature is in the range in the operating specifications.