Skip to main content

Install the front VGA assembly

Use this procedure to install the front VGA assembly.

Before installing the front VGA assembly:

  1. Read the safety information and installation guidelines (see Safety and Installation Guidelines).

  2. Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

To install the front VGA assembly, complete the following steps:

  1. Remove the fan cage assembly (see Remove the fan cage assembly).
  2. Route the cable into the slot.
    Figure 1. Front VGA assembly installation

  3. Align the front VGA assembly with the alignment pin, and push it slightly toward the rear of the server to it to the server.
    Figure 2. Front VGA assembly installation

  4. Tile and install the cable cover.
    Figure 3. Front VGA assembly installation

  5. Install the front VGA assembly with four screws.
    Figure 4. Front VGA assembly installation

  6. Connect the front video cable to the system board.
    Figure 5. Front VGA assembly installation

After installing front VGA assembly, complete the following steps:

  1. Reinstall the fan cage (see Install the fan cage assembly)

  2. Reinstall the top cover (see Install the top cover).

  3. Reconnect the power cords and any cables that you removed.

  4. Power on the server and any peripheral devices.