Skip to main content

Install the front VGA assembly

Follow instructions in this section to install the front VGA assembly.

Attention
  • Go over Installation Guidelines to ensure that you work safely.

  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

  1. Route the cable into the slot on the side of the server.
    Figure 1. Installing the front VGA assembly


  2. Align the top side of the VGA assembly with the top of the server.
    Figure 2. Installing the front VGA assembly


  3. Secure the front VGA assembly to the server with four screws.
    Figure 3. Installing the front VGA assembly


  4. Route the front VGA cable through the cable guide, and connect it to the system board.
    Figure 4. Connecting the front VGA cable


After this task is completed

Proceed to complete the parts replacement (see Complete the parts replacement).