Internal cable routing

See this section to do cable routing for specific components.

Note

Disengage all latches, release tabs, or locks on cable connectors when you disconnect cables from the system board assembly. Failing to release them before removing the cables will damage the cable sockets on the system board assembly, which are fragile. Any damage to the cable sockets might require replacing the system board assembly.

Identifying connectors
See this section to locate and identify the connectors on the electric boards.
2.5-inch drive backplane cable routing
Use the section to understand the cable routing for the 2.5-inch drive backplanes.
7mm drive backplane cable routing
Use the section to understand the cable routing for the 7mm drive backplane.
External diagnostic handset connector cable routing
Use the section to understand the cable routing for the external diagnostic handset connector.
Flash power module cable routing
Use the section to understand the cable routing for the flash power modules.
Front I/O module cable routing
Use the section to understand the cable routing for the front I/O module.
Front VGA assembly cable routing
Use the section to understand the cable routing for the front VGA assembly.
M.2 boot adapter cable routing
Use the section to understand the cable routing for the M.2 boot adapter.
Management NIC adapter cable routing
Use the section to understand the cable routing for the management NIC adapter.
PCIe riser 1 cable routing
Use the section to understand the cable routing for the PCIe riser 1.
PCIe riser 2 cable routing
Use the section to understand the cable routing for the PCIe riser 2.
PCIe riser 3 cable routing
Use the section to understand the cable routing for the PCIe riser 3.
Power distribution board cable routing
Use the section to understand the cable routing for the power distribution board.

Give feedback