Parts list
Identify each of the components that is available for your server with the parts list.
Go to Lenovo Data Center Support and navigate to the support page for your server.
Click .
Enter the serial number to view a listing of parts for your server.
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.
T1: Tier 1 customer replaceable unit (CRU). Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
F: Field replaceable unit (FRU). FRUs must be installed only by trained service technicians.
C: Consumable and Structural parts. Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
| Description | Type | Description | Type |
|---|---|---|---|
For more information about ordering parts:
| |||
| 1 Front top cover | T1 | 30 2U performance heat sink and processor carrier | F |
| 2 Rear top cover | T1 | 31 Lift handles | T1 |
| 3 Power supply unit filler | C | 32 Air baffle (rear, 3U standard PHM) | T2 |
| 4 Power supply unit | T1 | 33 M.2 drive | T1 |
| 5 Power supply bracket (CRPS) | T1 | 34 M.2 boot adapter | T1 |
| 6 Power distribution board | T2 | 35 M.2 drive retainer | T1 |
| 7 PCIe riser cage | T2 | 36 Air baffle (rear, 2U performance PHM) | T2 |
| 8 PCIe riser cable retainer | T1 | 37 2.5-inch drive backplane | T1 |
| 9 PCIe riser card | T2 | 38 2.5-inch drive filler (1-bay) | C |
| 10 PCIe adapter | T1 | 39 2.5-inch hot-swap drive | T1 |
| 11 7mm drive cage | T1 | 40 Flash power module | T1 |
| 12 7mm drive backplane | T1 | 41 Air baffle (front) | T1 |
| 13 PCIe riser extender | T2 | 42 Fan cage | T1 |
| 14 PCIe riser cage filler | C | 43 2.5-inch drive filler (8-bay) | C |
| 15 7mm drive filler | C | 44 Fan module | T1 |
| 16 7mm drive | T1 | 45 External diagnostics handset | T1 |
| 17 OCP module | T1 | 46 Mechanical parts kit (power supply key, serial port filler, and screws) | T1 |
| 18 OCP slot filler | C | 47 Power supply key (CFFv4) | T1 |
| 19 Crossbar | T1 | 48 Intrusion switch | T1 |
| 20 Chassis | F | 49 Drive backplane carrier | T2 |
| 21 Slide rail kit | T2 | 50 Cable management arm | T2 |
| 22 System I/O board | F | 51 Suction cup | C |
| 23 Firmware and RoT security module | F | 52 GPU adapter link bridge | T1 |
| 24 Processor | F | 53 Full-length GPU adapter | T1 |
| 25 MicroSD card | F | 54 Labels kit (PCIe riser cables) | T1 |
| 26 Memory module | T1/F1 | 55 Cable2 | T1 |
| 27 Processor board | F | 56 System service label | T1 |
| 28 CMOS battery (CR2032) | C | 57 Management NIC adapter | T1 |
| 29 3U standard heat sink and processor carrier | F | ||
1 For memory modules in memory module slot 1-32 when 2U performance PHM are installed.
2 For PCIe riser cable replacement, make sure to order the 54 Labels kit (PCIe riser cables).